LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> External Pages >> Different car >> Section 2091 (Steering And Wheel Alignment - Repair) >> Electronic Chassis Alignment >> 32 00 620 Adjusting rear axle >> Adjusting camber

Adjusting camber

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Replace nut (2) prior to adjustment and tighten to 5 Nm.

Turn eccentric bolt (1) to adjust camber to setpoint value.

Tighten nut (2).

Tightening torque 33 32 2AZ .

Fig 1: Adjusting Camber To Setpoint Value
G04794452Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals