27 10 720 Replacing servomotor (ATC 700)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: After replacement, the "Repair" service function must be carried out with in the BMW diagnosis system.

Necessary preliminary tasks:

Remove TRANSMISSION CROSS-MEMBER .

Disconnect plugs (1 and 2).

Tightening torque 27 00 14AZ , see 27 00 TRANSFER BOX IN GENERAL

Fig 1: Identifying Servomotor Plugs

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws and remove servomotor from transfer box.

Tightening torque 27 00 13AZ , see 27 00 TRANSFER BOX IN GENERAL

Fig 2: Identifying Screws Securing Servomotor To Transfer Box

Courtesy of BMW OF NORTH AMERICA, INC.