27 10 710 Replacing classification resistor for servomotor (ATC 700)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Delete previous resistance values when replacing the resistor.
Using BMW diagnosis system, work through test program in accordance with instructions.
Using BMW diagnosis system, work through test program in accordance with instructions.
Disconnect connector (1).
Release screw (2) and remove resistor.
Tightening torque 27 00 14AZ , see 27 00 TRANSFER BOX IN GENERAL