61 61 270 Removing and installing or replacing bracket for windscreen wiper system complete with motor
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove cowl panel cover . See 51 13 116 REMOVING AND INSTALLING/REPLACING COWL PANEL COVER .
Release screws (1). Tightening torque, see 61 61 6AZ in 61 61 WINDSCREEN WIPERS .
Disconnect plug connection (2).
Feed out bracket for windscreen wiper system (3) in upward direction.
Installation:
Rubber guide (4) must be correctly seated in guide (5).
Installation:
Before installing wiper arms, allow wiper motor to return to its rest position.
To ensure the wiper system works properly, check and correct the contact angle of the wiper arms.