61 31 135 Removing and installing/replacing headphones connection socket

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 340

NOTE:

See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Unclip trim (1) with special tool 00 9 340 from center console.

Installation:

Retaining lugs on trim (1) must not be damaged or missing.

Make sure trim (1) is correctly engaged on center console.

Fig 1: Identifying Trim Location

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Press together retaining lugs (2) and feed headphones connection socket in direction of arrow out of trim (3).

Installation:

Make sure headphones connection socket is correctly seated in trim (3).

Fig 2: Identifying Plug Connection And Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.