LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> External Pages >> Different car >> Section 2078 (General Electrical System - Repair) >> Switch >> 61 31 112 Removing and installing/replacing left or right shift paddle for automatic transmission

61 31 112 Removing and installing/replacing left or right shift paddle for automatic transmission

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Disconnect plug connection (1).

Release screw (3).

Feed out wiring harness (2) and remove shift paddle for automatic transmission (4) in direction of arrow from steering wheel (5).

Installation: 

Make sure shift paddle for automatic transmission (4) is correctly seated on steering wheel (5)

Make sure wiring harness (2) is laid exactly.

Fig 1: Identifying Wiring Harness, Plug Connection And Screw
G06213480Courtesy of BMW OF NORTH AMERICA, INC.