61 31 079 Removing and installing/replacing switch for hazard warning flashers/central locking

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 340

NOTE:

See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

IMPORTANT: Risk of damage!
Protect middle fresh-air grille in working area against damage, tape off if necessary.

Lever switch for hazard warning flashers/central locking (1) with special tool 00 9 340 out of middle fresh-air grille and feed out.

Disconnect associated plug connection and remove switch for hazard warning flashers/central locking (1).

Fig 1: Lever Hazard Warning Flashers And Central Locking With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.