61 71 015 Removing and installing/replacing a spray nozzle in windscreen washer system

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Unlock retaining clip for water hose (1) and detach water hose in direction of arrow.

Disconnect plug connection (2) and detach in direction of arrow.

Press spray nozzle (3) in direction of arrow (A) and remove at top in direction of arrow (B).

Fig 1: Pressing Spray Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) must not be damaged.
Check adjustment of spray nozzles and correct if necessary

Fig 2: Retaining Lugs (1) Must Not Be Damaged

Courtesy of BMW OF NORTH AMERICA, INC.