61 35 975 Removing and installing/replacing bumper aerial/antenna for Comfort Access System
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- E71: Remove trim for bumper trim at bottom middle rear. See 51 12 223 REMOVING AND INSTALLING/REPLACING TRIM FOR REAR BOTTOM MIDDLE BUMPER TRIM .
Reach in middle behind bumper trim at rear and disconnect plug connection (1).
Unlock catches (2) and feed bumper aerial/antenna for comfort access system (3) in direction of arrow out of holder.
Installation:
Make sure bumper aerial/antenna for comfort access system (3) is correctly seated and engaged in holder.