Test step 2 - after charging the battery
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
STARTING CAPABILITY RESULT REFERENCE
| Charge condition 1) | Starting capability 2) | Test result |
|---|---|---|
| Not testable | Defective | |
| less than 50 % | less than 75 % | Charge |
| more than 50 % | more than 75 % | Charge |
- Charge condition and starting power must always be evaluated together
- When test charging for more than 5 hours, use charger Gossen CG 32 or Siemens/Gossen VB 801
- Fully charge until charge state is more than 80 %.
NOTE:
If battery was checked on the positive terminal in the engine compartment, repeat check directly on battery for sake of safety.