22 32 001 Replacing Rubber Mount For Transmission Mounting (ATC 700): Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Arrow on rubber mount must point to arrow on housing.

Coat housing bore and rubber mount with Circolight (refer to BMW Parts Service).

Fig 1: Identifying Rubber Mount And Circolight

Courtesy of BMW OF NORTH AMERICA, INC.

Insert special tool 22 1 102 with pins into openings of rubber mount.

Fig 2: Identifying Rubber Mount And Pins

Courtesy of BMW OF NORTH AMERICA, INC.

Install rubber mount with special tools 22 1 102 / 22 1 103 / 33 4 465 and 22 1 017.

Fig 3: Identifying Rubber Mount With Special Tools

Courtesy of BMW OF NORTH AMERICA, INC.