13 54 020 Removing And Installing/Sealing Right Throttle Valve Assembly (N63): Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Switch off ignition.
- Remove right intercooler.
NOTE:
Picture shows the left throttle valve assembly, the procedure for the right side is identical.
Unlock plug (1) and remove.
Unfasten screws (2).
Tightening torque, see 13 54 THROTTLE AND ACTUATOR .
Remove throttle valve assembly (3).
Installation:
Check plug connection (1) for coolant remnants. If necessary, clean plug connection (1) with compressed air.