11 22 000 Removing and installing/replacing flywheel (N63)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 11 9 260
See ENGINE - SPECIAL TOOLS (N54, N63) .
Necessary preliminary tasks:
- Remove automatic transmission
- Remove manual transmission
- Remove clutch
Locate flywheel (1) with special tool 11 9 260.
Release flywheel screws in area (1).
Remove flywheel (2).
Installation:
Clean threads on flywheel screws in crankshaft.
Flywheel (2) is secured with an alignment pin.
Fit flywheel (2).
Fit new flywheel screws .
Tightening torque 11 22 1AZ, see 11 22 FLYWHEEL