33 4 400 Puller Fixture

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Note: For removing inner wheel bearing races on rear axle

Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, RR1

SI number: 1 05 99 (426)

Order number: 33 4 400

Puller fixture

Consisting of:

1 = 33 4 401 Basic body

2 = 33 4 402 Spindle

3 = 33 4 403 Wrench, large

4 = 33 4 404 Wrench, small

5 = 33 4 405 Clamping pliers (45...51 mm)

6 = 33 4 406 Clamping pliers (50...55 mm)

7 = 33 4 407 Clamping pliers (55...61 mm)

Note: Model series: E67

Fig 1: Puller Fixture (33 4 400)

Courtesy of BMW OF NORTH AMERICA, INC.