33 3 350 Set Of Tools

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For removing and installing rubber mount in top and bottom control arms

Series: E36, E46, E83, E85, E86

Storage location: A22

SI number: 1 10 90(288)

Order number: 33 3 350

Set of tools

Consisting of:

1 = 33 3 351 Sleeve with centering pin

Note: For pressing rubber mount in/out

2 = 33 3 352 Thrust sleeve

Note: For pressing out rubber mount in upper control arm

3 = 33 3 353 Shaped piece

Note: For pressing in rubber mount in lower control arm

33 3 354 Spacer

Note: For maintaining distance between both control arm halves when pressing rubber mount in/out

Fig 1: Set Of Tools (33 3 350)

Courtesy of BMW OF NORTH AMERICA, INC.