33 3 220 Set Of Tools

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 00 8 550, 33 3 103, 33 3 104, 33 3 107

Note: For removing and installing rubber mount in rear axle carrier

Series: E31, E36, E46, E83, E85, E86

Storage location: A26, B40

SI number: 1 05 90(207)

Order number: 33 3 220

Set of tools

Consisting of:

1 = 33 3 221 Shaped disk

Note: For removing front rubber mounts from rear axle carrier / model series: E31

In conjunction with: 00 8 550 and 33 3 107

2 = 33 3 222 Upper shaped disk

Note: For installing front rubber mounts in rear axle carrier

In conjunction with: 33 3 103, 33 3 104

3 = 33 3 223 Lower shaped piece

Note: For installing front rubber mounts in rear axle carrier

In conjunction with: 33 3 103, 33 3 104

4 = 33 3 224 Shaped disk

Note: For removing rear rubber mounts from rear axle carrier / model series: E31

In conjunction with: 00 8 550 and 33 3 107

5 = 33 3 225 Upper shaped disk

Note: For installing rubber mounts in rear axle carrier Model series: E31

In conjunction with: 33 3 103, 33 3 104

6 = 33 3 226 Lower shaped piece

Note: For installing rubber mounts in rear axle carrier Model series: E31

In conjunction with: 33 3 103, 33 3 104

33 3 227 Thrust piece

Note: Model series: E36, E46

33 3 228 Slip bushing

Note: Model series: E36, E46

Fig 1: Set Of Tools (33 3 220)

Courtesy of BMW OF NORTH AMERICA, INC.