33 2 200 Fixture

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 4 200, 33 5 070

Note: For removing and installing output shaft in drive flange as well as for removing front wheel bearing unit.

Series: E30, E31, E32, E34, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E83, E85, E86, E87, E90, E91, E92, E93, RR1, RR2

Order number: 33 2 200

Fixture

Consisting of:

1 = 33 2 201 Basic body

2 = 33 2 202 Counterholder

In conjunction with: 33 5 070

3 = 33 2 203 Spindle M20x1.5 / length 150 mm

Note: For pressing out. Model series: E30, E31, E32, E36, E38, E39, E46, E53, E65, E66, E67, E83, E85

4 = 33 2 204 Spindle M20x1.5 / length 180 mm

Note: For drawing in. Model series: E30

5 = 33 2 205 Spindle M20x1.5 / length 190 mm

Note: For drawing in. Connection: M27x1.5 Model series: E31, E52, E53, E60, E61, E65, E66, E67, E83

6 = 33 2 206 Spindle M20x1.5 / length 190 mm

Note: For drawing in. Connection: M24x1.5 Model series: E36, E46

7 = 33 2 207 Threaded piece

8 = 33 2 208 Nut with thrust bearing

Note: Model series: E30, E31, E32, E36, E38, E39, E46, E52, E53, E60, E61, E65, E66, E67, E83, E85, RR1