33 1 300 Rillex Tapered Roller Bearing Extractor
WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Note: For bevel pinion and differential case (final drive) / for mounting sprocket wheel on crankshaft (M70) / for removing bearing inner race from drive flange (E36, E46)
Transmission: Rear axle differential type G, K, M
Storage location: B6, C6
Order number: 33 1 300
Rillex tapered roller bearing extractor
Consisting of:
1 = 33 1 301 Connecting piece with spindle
1 = 33 1 311 Gripper
2 = 33 1 312 Thrust piece
Note: For removing bearing inner race from drive flange - Series: E36/5
In conjunction with: 00 7 500
5 = 33 1 305 Thrust piece (old)
6 = 33 1 306 Thrust piece
7 = 33 1 307 Thrust piece
8 = 33 1 308 Thrust piece
9 = 33 1 309 Thrust piece
Note: For final drive and for mounting sprocket wheel on crankshaft (M70)
In conjunction with: 00 8 500