24 21 Input, Intermediate and Output Shafts
WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
INPUT, INTERMEDIATE AND OUTPUT SHAFTS - TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Flange nut, output flange | A5S 300J | 225 Nm | ||
| Flange nut, output flange without spring washer | A5S 360R | 30 Nm | ||
| Flange nut, output flange, with spring washer | A5S360R / A5S 390R / A4S 200R | 60 Nm | ||
| A4S 270R / A4S310R | 100 Nm |