00 00 ... Tires: Checking Inflation Pressure, Correcting If Necessary (Incl. Spare Wheel), Checking External Condition, Tread Depth, Pattern

WARNING: This page is about a different car, the 2008 BMW X5 and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Checking tire inflation pressure:
- Check tire inflation pressure in accordance with information plate on B-pillar
- The inflation pressure in the spare wheel must be 0.5 bar higher than the maximum specified value on the information plate
- Initialize Run Flat Indicator. See 36 11 500 INITIALIZING RUN FLAT INDICATOR (RPA) .
Checking tire condition:
- Check tread depth of all types with tire tread gauge
- Check tire tread surfaces and side walls for incisions and foreign particles such as nails or screws
- Check tire tread pattern for localized flattening and wear on one side; if necessary, carry out wheel/chassis alignment after consulting with customer and issue a separate invoice for this work

NOTE:

For details of approved wheel-tire combinations, refer to KSD CD.
For reasons of driving safety, only use tires of the same type and tread pattern on a single vehicle
Inform customer of any incorrect or worn tires