63 21 180 Removing and installing/replacing left or right rear light (on side panel)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)
.
Necessary preliminary tasks:
- Remove socket housing for rear light, see 63 21 055 Replacing a socket housing for left or right tail light .
Unscrew nuts (1).
Tightening torque: 63 21 1AZ, see 63 21 REAR LIGHT UNIT .
Remove rear light (2) in outwards direction from side panel (3).
Installation:
Make sure gap (outer) is uniform all round between rear light (2) and side panel (3).