54 13 150 Removing and installing rear cross - member
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove glass slide/tilt sunroof54 13 080 Removing and installing complete glass slide/tilt sunroof .
- Remove control unit, see 61 35 714 REMOVING AND INSTALLING/REPLACING CONTROL UNIT FOR SLIDE/TILT SUNROOF .
- Remove drive, see 67 61 515 REPLACING DRIVE WITH GEAR (FRONT) FOR ACTUATING SLIDE/TILT SUNROOF (PANORAMA GLASS SUNROOF) .
Release screws in marked area.
Feed cross-member (2) out of wiring harness (1) during removal.
Installation:
Pitch cables must be correctly laid diagonally in guide.