LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> External Pages >> Different car >> Section 1388 (Restraints - Repair) >> 72 12 Airbag Generator/Airbag Unit >> 72 12 ... Procedure after airbag triggering as result of an accident

72 12 ... Procedure after airbag triggering as result of an accident

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Check and/or replace following components after airbag triggering:

Satellites (control unit + sensor) 

Cables and plugs 

Seats 

If the severity of the impact has not caused any other damage to the seat, only the triggered gas generator needs to be replaced.

External feature: The triggered head restraint is folded forwards and engaged.

The repair work can be carried out in the car with the rear panel removed. The entire system can be pushed back into its original position and the new gas generator installed.

The gas generator can be replaced up to 5 times.

Driver's airbag 

Expose plug connection of passenger airbag, see 72 12 000 Removing and installing / replacing airbag module on passenger side .

Side airbag, front/rear 

Head airbag (AHPS) 

Knee airbag 

Passive knee protector