LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> External Pages >> Different car >> Section 1387 (Seats - Repair) >> 26 rear seat through-loading >> 52 26... Removing and installing/replacing fixture for roller blind on rear seat (through - loading system) on left/right

52 26... Removing and installing/replacing fixture for roller blind on rear seat (through - loading system) on left/right

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Unclip cover (1) on both sides towards top.

Fig 1: Removing Cover On Both Sides Towards Top
G04789168Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws (2).

Installation: 

Clips (1) must not be damaged.

Fit opening of cover for upper backrest edge.

Fig 2: Clips And Screws
G04789169Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals