52 26... Removing and installing/replacing finishing strip on armrest for rear seat
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
Slide special tool 00 9 317 behind retaining pin of upper cover section underneath finishing strip and unclip strip towards rear.
Repeat procedure if necessary on other side.
Feed finishing strip out of armrest pins.