51 47 135 Removing and installing/replacing left or right lashing rail in luggage compartment floor
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove inner window cavity cover strip, see 51 37 261 Removing and installing/replacing window cavity cover strip for door window, rear left or right
- Remove rear luggage compartment floor trim, see 51 47 102 Removing and installing/replacing luggage compartment floor trim panel
- Remove front trim for luggage compartment floor, see 51 47 131 Replacing front trim for luggage compartment floor
- Remove top trim from tail panel, see 51 46 050 Removing and installing/replacing top trim on rear apron
- Remove luggage compartment wheel arch trim on left or right, see 51 47 151 Removing and installing / replacing left luggage compartment wheel arch trim
Right side only:
- Remove storage compartment in luggage compartment on right, see 51 47 ... Removing and installing/replacing storage compartment in luggage compartment on right
NOTE:
The operation is described on the left side; proceed in the same way for the right side.
Release screws (1).
Lashing rail (2):
- Slide approx. 2 cm towards rear
- Feed out towards top front
Replacement:
If necessary, remove reinforcement plate (1) with guide (2) from lashing rail (3) and fit on new part.