51 16 026 Replacing mirror glass
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
WARNING:
Move mirror glass with hand carefully and slowly.
If mirror glass is damaged:
Wear protective goggles and cut-proof gloves.
Risk of injury by flaking-off glass splinters.
If mirror glass is damaged:
Wear protective goggles and cut-proof gloves.
Risk of injury by flaking-off glass splinters.
IMPORTANT:
Bring door mirror to room temperature to prevent catches from breaking off.
Press mirror glass (1) on side vehicle by hand to full extent.
NOTE:
Secure mirror glass (1) against falling out.
Unclip mirror glass (1) from outer side with special tool 00 9 317 all round.
Unlock and disconnect associated plug connections, remove mirror glass (1).
Installation:
Retaining lugs (1) must not be damaged.
Fit mirror glass (2) with retaining lugs (1) flush on mirror adjusting drive and clip into place.
Ensure correct locking.
Make sure mirror adjusting drive functions correctly.