51 16 ... Calibrating compass in interior rearview mirror
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
It may be necessary to alter the magnetic deflection zone if the vehicle is more than two ranges away from the set deflection zone.
For numbers of magnetic deflection zone, refer to Owner's Handbook.
If may be necessary to calibrate the compass if:
- vehicle battery has been disconnected for an extended period of time
- "C" appears in compass display
- there is no compass display
Setting magnetic deflection zone:
- Switch ignition on.
- Using a suitable tool (1), press pushbutton in area (A) of mirror (2) until a number appears in compass display (B)
- Press pushbutton repeatedly until number of desired zone appears
- Wait until direction display appears
- Magnetic deflection zone is now set
Calibrating compass:
- Switch ignition on.
- Using a suitable tool (1), press pushbutton in area (A) of mirror (2) until "C" appears in compass display (B)
- Drive vehicle 2 to 3 times in a circle at approx. 10 mph
- Calibration process is completed when direction display appears