LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> External Pages >> Different car >> Section 1386 (Body Equipment - Repair) >> 13 trim, covers, handle trim >> 51 13 115 Removing and installing/replacing cowl panel cover

51 13 115 Removing and installing/replacing cowl panel cover

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Unclip cover (1) on cowl panel.

Fig 1: Cover
G04788422Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If necessary, replace faulty clips (1) on cover (3).

Ensure retainers (2) are correctly seated.

Fig 2: Clips And Cover
G04788423Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

If necessary, remove seal (1) from cover (2) for cowl panel.

Fig 3: Seal And Cover
G04788424Courtesy of BMW OF NORTH AMERICA, INC.