41 11 005 Replacing Left Cross-Member Mounting

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Read contents of Body, General, see 41 0 Contents of Body, General .

Place vehicle on straightening bench.

Following new body parts are required:

(1) Mounting, cross-member

Fig 1: Mounting, Cross-Member

Courtesy of BMW OF NORTH AMERICA, INC.

Open weld joints in area (1).

Installation:

Adjust new part to fit with straightening attachment or universal mount.

Fig 2: Weld Joints In Area

Courtesy of BMW OF NORTH AMERICA, INC.