41 34 041 Replacing Complete Tail Panel

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Read contents of Body, General, see 41 0 Contents of Body, General .

Following new body parts are required:

(1) Rear trim
(2) Rear trim, inner

Fig 1: Rear Trim And Rear Trim, Inner

G04788256

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Carry over the following work steps symmetrically to the other side of the car.

Open weld joints in areas (1).

Fig 2: Weld Joints In Area

G04788257

Courtesy of BMW OF NORTH AMERICA, INC.

Open weld joints in area (1).

Fig 3: Weld Joints In Area

G04788258

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

The two new components are fitted individually.

Slide in inner rear trim (2).

Bend open metal plate slightly in areas (1).

Fig 4: Inner Rear Trim And Metal Plate Slightly In Areas

G04788259

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Also weld rear trim (2) in areas (1).

Fig 5: Weld Rear Trim In Areas

G04788260

Courtesy of BMW OF NORTH AMERICA, INC.