34 52 550 Removing and installing/replacing DSC sensor
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)
.
Necessary preliminary tasks:
- Remove storage compartment, see 51 16 200 REMOVING AND INSTALLING STORAGE COMPARTMENT .
NOTE:
The DSC sensor contains the functions of the transversal acceleration sensor and the rotation rate sensor.
Unfasten plug connection (1).
Installation:
Make sure plug connection locks correctly.
Release screws (2) and remove rotation rate sensor.
Installation:
Tightening torque: 34 51 3AZ, see 34 51 SLIP CONTROL SYSTEM (ABS, ASC+T, DSC) .