33 55 040 Replacing stabilizer links for stabilizer
WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
Release nuts (1, 2); grip with special tool 31 1 140 if necessary.
Remove stabilizer link (3).
Installation:
Replace self-locking nuts.
Tightening torque: 33 55 7AZ, see 33 55 STABILIZER BAR .