33 32 170 Removing and installing/replacing left or right tension strut
WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Build date from 07/2006:
Thread inserts in compression strut for securing tension strut have been omitted.
Thread inserts in compression strut for securing tension strut have been omitted.
IMPORTANT:
Observe safety instructions for raising the vehicle, see 00 ... ... LIFTING VEHICLE WITH A LIFTING PLATFORM
.
Driving without tension struts is not permitted!
Driving without tension struts is not permitted!
Release screws (1, 3).
Remove tension strut (2).
Installation:
When replacing compression strut: If necessary, replace threaded screws (3) with self-tapping screws.
Tightening torque: 33 32 26AZ, see 33 32 CONTROL ARMS AND STRUTS .