33 17 005 Replacing rubber mount for rear differential mounting at rear
WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear differential, see 33 10 010 Removing and installing/replacing rear differential .
IMPORTANT:
Risk of damage!
When replacing rubber mount (B) with rubber mount (A), fit a spacer between rear differential and rubber mount.
Rubber mount (A) must not be replaced by rubber mount (B).
When replacing rubber mount (B) with rubber mount (A), fit a spacer between rear differential and rubber mount.
Rubber mount (A) must not be replaced by rubber mount (B).
A = Remove rubber mount
B = Remove rubber mount (with hydraulic damping)