32 41... Instructions for removing and installing ear clips
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
NOTE:
The work steps are show on assorted components. Ear clip must always be replaced.
To remove an ear clip, place special tool 32 1 260 at right angles to ear and cut ear open.
The ear clip can be fitted not only axially but also radially after the hook fastener has been opened.
Attach hook fastener and press ear together with special tool 32 1 260.
Side cutter of special tool 32 1 260 can be used in areas which are difficult to access.
IMPORTANT:
Gap (A) max. 1 mm!