25 16 065 Replacing gaiter (selector lever cover) for shift tower
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove grip, see 25 16 061 Replacing grip/knob for shift lever .
- Carefully pull gaiter taut on leather
- Gently press frame inwards until catch is released
- Lift out gaiter
IMPORTANT:
Start removing at top left, otherwise the frame will be damaged.
Installation:
Retaining lugs must not be damaged.