25 11 071 Replacing knob for shift lever

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not twist knob during removal as this would cause the turning lock in the knob to shear off.

Tug firmly to remove knob.

Installation:

Fit knob on selector lever, align and press on until it snaps noticeably into place.

NOTE: Illustration shows E46.

Fig 1: Detaching Knob With Firm Tug

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Push rubber gaiter (1) down until groove (2) is fully exposed.

Fig 2: Pushing Rubber Gaiter Down

Courtesy of BMW OF NORTH AMERICA, INC.