61 62 060 Removing and installing/replacing rear window wiper motor
WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove wiper arm for rear window, see 61 62 030 Replacing wiper arm for rear window wiper
- Remove panel for rear lid, see 51 49 008 REMOVING AND INSTALLING/REPLACING PANEL FOR REAR LID .
Unfasten plug connections (1) and disconnect.
NOTE:
Secure rear window wiper motor (3) against falling out.
Release screws (2).
Installation:
Tightening torque: 61 62 8AZ, see 61 62 TAILGATE WINDOW WIPER .
Remove rear window wiper motor (3) in direction of arrow.
Installation:
Replace grommet (4) if necessary.