Removal & Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 BMW M5, 2003 BMW 540i, 2003 BMW 530i, 2003 BMW 525i, and 2002 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Remove trim for pedal assembly.
Depress brake pedal as far as possible, using pedal support if necessary.
Pull tappet and sleeve forward completely (1). Press together clips and pull back switch (2). See Fig 1.
To install, reverse removal procedure.
Slowly bring brake pedal into initial position.

Fig 1: Removing Brake Light Switch

Courtesy of BMW OF NORTH AMERICA, INC.