LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Tightening Torques (N52) >> 24 Connecting Rod With Bearing >> 11 24 Connecting Rods and Bearings

11 24 Connecting Rods and Bearings

CONNECTING RODS AND BEARINGS - TIGHTENING TORQUES

  Type Thread Tightening specification Measure
1AZ ASA screws
(connecting rod bolts)
(12 x)
Connecting rod bearing cap to connecting rod.		 N52K M8 x 47 Replace screws.
Screws washed and oiled.
Jointing torque and angle of rotation must be observed without fail.		  
      Jointing torque 20 Nm
      Torque angle 70 °
scientia non olet · About LEMON Manuals