11 22 Flywheel
FLYWHEEL - TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hexagon screws (6 x) Flywheel to crankshaft for vehicles with SA205 (automatic transmission). |
N52K | M12 x 25.5 | Replace screws. Jointing torque and final tightening must be observed without fail. |
|
| 1. Jointing torque | 30 Nm | |||
| 2. Final tightening | 125 Nm | |||
| 2AZ ISA screws (6 x) Flywheel to crankshaft for vehicles without SA205 (automatic transmission). |
N52K | M12 x 25 | Replace screws. | 120 Nm |