11 21 Crankshaft and Bearings
CRANKSHAFT AND BEARINGS - TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hexagon screw (central screw) (1 x) Hub of vibration damper to crankshaft. |
N52K | M16 x 80 | Replace screw. Screw and thread are lightly oiled. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 100 Nm | |||
| Torque angle | 360 ° |