11 13 Oil Pan
OIL PAN - TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Optional extra designation: SA205 = Automatic transmission |
||||
| 1AZ Plug (1 x) Oil drain to oil sump. |
N52K | M12 x 1.5 | Replace sealing ring. | 25 Nm |
| 2AZ ASA screws (20 x) Oil sump (aluminium) to bedplate. The end faces of the aluminium screw heads are painted blue. |
N52K | M8 x 26 | Replace screws. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 90 ° | |||
| 3AZ ASA screws (5 x M8 x 112) (3 x M8 x 92) Oil sump (aluminium) to bedplate. The end faces of the aluminium screw heads are painted blue. |
N52K | M8 | Replace screws. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 180 ° | |||
| 4AZ ASA screws (7 x) Oil deflector to bedplate. The end faces of the aluminium screw heads are painted blue. |
N52K | M6 x 20 | Replace screws. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 4 Nm | |||
| Torque angle | 90 ° | |||
| 5AZ ASA screws (3 x) Transmission to oil sump. |
N52K | M8 x 50 | 19 Nm | |
| 6AZ Hexagon nuts (2 x) Holder, transmission oil cooler line, to oil sump for vehicles with optional extra SA205. |
N52K | BM6 | 8 Nm | |
| 7AZ Hexagon nut (1 x) Holder, coolant hose, to oil sump. |
N52K | M6 | 9 Nm | |
| 8AZ Hexagon screw (1 x) Holder, coolant hose, to oil sump. |
N52K | M10 x 18 | 21 Nm |