11 34 560 Replace all valve stem seals (M57T2-SCR)

Necessary preliminary work: 

• Remove cylinder head. See 11 34 715 Replace all valve springs (M57T2- SCR) .
• Remove all valve springs. See 11 34 715 Replace all valve springs (M57T2- SCR) .

Press special tool 11 6 370 onto valve stem seal and turn.

Pull out special tool 11 6 370 together with valve stem seal.

Lubricate valve stem and fit special tool 11 1 960.

Coat new valve stem seal (1) with oil and install.

Detach special tool 11 1 960.

Press on valve stem seal with special tool 11 6 380 to the limit position.

Assemble engine.