Replace sealing ring

When installing, apply a thin coating of antiseize agent to sealing ring.

Fig 1: Removing Guide Tube

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (5).

Tightening torque, see 11 13 6AZ in 11 13 OIL PAN .

Release holder (4) with ARS expandable hoses from oil sump guides and place to one side.

Slacken nut (1).

Tightening torque, see 11 13 7AZ in 11 13 OIL PAN .

Release holder (3) with transmission oil cooler lines (2) from oil sump guide and place to one side.

Fig 2: Identifying Holder With Transmission Oil Cooler Lines And Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws (1 and 4).

Tightening torque, see 11 13 8AZ in 11 13 OIL PAN .

Release holder (2) with coolant return line (3) from oil sump and place to one side.

Fig 3: Identifying Holder With Coolant Return Line And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws (2).

Tightening torque, see 11 13 9AZ in 11 13 OIL PAN .

Remove bearing block (1) from oil sump.

Fig 1: Identifying Bearing Block Of Oil Sump And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Bolts of oil sump have different lengths.
Observe different tightening torques.

Release bolts along line (1).

Tightening torque, see 11 13 2 and 3AZ in 11 13 OIL PAN .

If necessary, release nuts (2) and remove oil level sensor.

Tightening torque, see 11 13 10AZ in 11 13 OIL PAN .

Fig 1: Identifying Oil Level Sensor Nuts And Oil Sump Bolts

Courtesy of BMW OF NORTH AMERICA, INC.