Observe following instructions relating to special tool

1. Prior to each use, check the special tools for defects, modifications and operational reliability.
2. Damaged/modified special tools must not be used!
3. No changes or modifications may be made to the special tools!
4. Keep special tools dry, clean and free of grease.

Necessary preliminary tasks: 

• Secure engine bonnet/hood in service position. See 51 00... SERVICE POSITION OF ENGINE HOOD/BONNET .
• Remove intake duct.
• Remove intake filter housing. See 13 71 000 REMOVING AND INSTALLING/REPLACING THE INTAKE SILENCER HOUSING (M57T2 WITH AND WITHOUT SCR) .
• Remove acoustic cover.
• Remove COMPARTMENT PARTITION WALL .

Assemble cross member 00 0 200 with special tools 00 0 202, 00 0 204, 00 0 208.