11 00 050 Removing and installing engine (SCR) M57T2: Notes

Necessary preliminary work: 

• Disconnect the battery earth lead. See 12 00... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .
• Disconnect positive battery cable from connection point.
• Move engine compartment lid into assembly position. See 51 00... SERVICE POSITION OF ENGINE HOOD/BONNET .
• Remove INTAKE PLENUM .
• Remove right pressure pipe. See 11 61 350 Removing and installing/replacing left pressure pipe (charge air hose (M57T2-SCR) .
• Remove left PRESSURE PIPE .
• Release engine wiring harness from electronics box. See 12 51 001 REPLACING WIRING HARNESS SECTION FOR ENGINE (M57T2)
• Remove radiator air duct. See 51 71 099 REMOVING AND INSTALLING/REPLACING RADIATOR AIR GUIDE .
• Remove radiator. See 17 11 000 REMOVING AND INSTALLING RADIATOR (M57T2) .
• Unlock and detach all coolant hoses.
• Remove charge air cooler. See 17 51 000 REMOVING AND INSTALLING/REPLACING CHARGE AIR COOLER (M57T2, N57) .
• Release power steering pump  . See REMOVING AND INSTALLING POWER STEERING PUMP FOR POWER STEERING GEAR WITH ACTIVE FRONT STEERING (N62TU) or REMOVING AND INSTALLING/REPLACING POWER STEERING PUMP FOR POWER STEERING GEAR WITH DYNAMIC DRIVE (N62, N62TU) and place to one side.
• Remove both front output shafts  . See 31 60 003 REMOVING AND INSTALLING OR REPLACING LEFT OUTPUT SHAFT or 31 60 004 REMOVING AND INSTALLING / REPLACING RIGHT OUTPUT SHAFT .
• Draw off, evacuate and fill air conditioning system. See 64 50 009 DRAWING OFF, EVACUATING AND FILLING A/C SYSTEM (R 134A) .
• Remove condenser. See 64 53 551 REMOVING AND INSTALLING OR REPLACING CONDENSER FOR A/C SYSTEM .
• Remove transmission. See 24 00 023 REMOVING AND INSTALLING AUTOMATIC TRANSMISSION (GA6HP26Z) M57T2 .