62 30 005 Removing and Installing/Replacing Trim for Head-Up Display

Special tools required: 

• 00 9 317. Refer to00 9 310 ASSEMBLY WEDGES (SET IN PLASTIC CASE)

Lever out trim for head-up display (1) with special tool 00 9 317 (00 9 310 ASSEMBLY WEDGES (SET IN PLASTIC CASE) ) towards top.

Fig 1: Removing Lever

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure detent lugs (1) are correctly seated.

Fig 2: Identifying Detent Lugs

Courtesy of BMW OF NORTH AMERICA, INC.