51 23 110 Removing And Installing/Replacing Left Hood/Bonnet Lock

Unclip coupling (1) from side panel.

Lever out cover (2) at coupling (1).

Lever cable (3) out of coupling (1).

NOTE: The operation "Disconnect cable for hood/bonnet lock" ends here.

Fig 1: Identifying Coupling And Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Fig 2: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Attachment parts are shown removed for purposes of clarity.

Feed out hood/bonnet lock (1) through opening (2) towards rear.

Fig 3: Identifying Hood/Bonnet Lock

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Attachment parts are shown removed for purposes of clarity.

Disengage Bowden cable (1) in direction of arrow from engine hood lock (2).

Fig 4: Disengaging Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.